Systems, Subsystems & Solutions

4838 Series Audio Transformer

4838 is a 1:1 line matching transformer with the following features:

Features: 
  • Low profile
  • Small volume
  • Conforming to FCC part 68 and Canadian CS 03 regulations
  • +13 dBm at 600 ohms max. level at 200 Hz
  • 1 mA DC current with 1.3H min. inductance at +13dBm level, line and secondary side

4831 - 4837 Series D.C. Reactor

D.C. REACTORS with horizontal channel frames for linear power supplies.

Features: 
  • Economical “Channel Frame” construction
  • 2-hole horizontal mounting
  • Seven standard sizes
  • Lead length, 8 - 10"

4808 - 4820 Series Power Transformer

LOW VOLTAGE RECTIFIER Transformers with fully enclosed vertical end covers.

Features: 
  • Primary voltage,115 Volts, 60 Hz
  • Primary and secondary leads 8-10" long
  • 4-hole vertical mounting
  • 13 sizes are available, covering the range: 100 to 500 VA
  • CSA listed (LR 47366)

4801 - 4807 Series Power Transformer

LOW VOLTAGE RECTIFIER Transformers with fully enclosed vertical end covers.

Features: 
  • Primary voltage,115 Volts, 60 Hz
  • Primary and secondary leads 8-10" long
  • 4-hole vertical mounting
  • 7 sizes are available, covering the range: 30 to 100 VA
  • CSA listed (LR 47366)

4781 - 4795 Series Power Transformer

LOW VOLTAGE RECTIFIER Transformers. Open style with L-bracket mounting.

Features: 
  • Primary voltage,115 Volts, 60 Hz
  • Primary and secondary leads 8-10" long
  • 4-hole horizontal L-bracket mounting
  • 15 sizes are available, covering the range: 35 to 450 VA
  • CSA listed (LR 47366)

4766 - 4770 Series Power Transformer

LOW VOLTAGE RECTIFIER Transformer with horizontal channel frames.

Features: 
  • Primary voltage,115 Volts, 60 Hz.
  • Primary and secondary leads 8-10" long
  • 2-hole horizontal mounting
  • 5 sizes are available, covering the range: 10 to 50 VA
  • CSA listed (LR 47366)

4760 - 4765 Series Power Transformer

LOW VOLTAGE RECTIFIER Transformers with horizontal channel frames.

Features: 
  • Primary voltage,115 Volts, 60 Hz
  • Primary and secondary leads 8-10" long
  • 2-hole horizontal mounting
  • 6 sizes are available, covering the range: 1 to 10 VA
  • CSA listed (LR 47366)

CEP-4748 Series Common Mode Inductor


CEP-4748 is a Common Mode Inductor for Switch Mode Power Supplies.

Features: 
  • Inductance range: 0.33 to 82 mH
  • Rated current range: 17.8 to 1.3 Amp
  • Split bobbins for increased dielectric strength (4000 V RMS)
  • CSA listed (LR 47366) and U.L. recognized (E100878)
  • Exceeds VDE, BSI and IEC regulatory requirements

CEP-4738 Series Common Mode Inductor

CEP-4738 is a Common Mode Inductor for Switch Mode Power Supplies.

Features: 
  • Inductance range: 0.33 to 82 mH
  • Rated current range: 12.8 to 1.5 Amp
  • Split bobbins for increased dielectric strength (4000 V RMS)
  • CSA listed (LR 47366) and U.L. recognized (E100878)

CEP-4737 Series Common Mode Inductor

CEP-4737 is a Common Mode Inductor for Switch Mode Power Supplies.

Features: 
  • Inductance range: 0.33 to 82 mH
  • Rated current range: 10 to 0.8 Amp
  • Split bobbins for increased dielectric strength (4000 V RMS)
  • CSA listed (LR 47366) and U.L. recognized (E100878)
  • Exceeds VDE, BSI and IEC regulatory requirements
Syndicate content