Components and Subsystems

CTP-4548 Series High Current Toroidal Inductor

CTP-4548 is a high current inductor with Core type: 0.80” o.d., Iron Powder, perm 33. Power rating: 1.2 watts for temp. rise 50°C. Typical applications: Filter Inductors in Switch Mode Power Supplies.

Features: 
  • Flying leads (1.00”), for vertical or horizontal mounting
  • 4-pin header, for vertical mounting
  • Threaded center hole, flying leads (2.00”)
  • 2-pin header, for vertical mounting

TEP-4532 Series Line Matching Transformer

TEP-4532 is a 1 : 1 line matching transformer for Interfacing equipment to telephone line when small size and high insulation voltage is required.

Features: 
  • Low profile
  • Conforming to FCC part 68 and Canadian CS 03
  • Split secondary windings to enable center tapped current feed

TLA-4529 Series Line Matching Transformer

TLA-4529 is a 1:1 line matching transformer with Interfacing equipment to a 600Ω line, requiring high insulation voltage between line and equipment, and where no DC current handling is required.

Features: 
  • Designed to meet reinforced insulation to EN41003 & EN41003
  • Also conforms to U.S. FCC part 68, Canadian CS 03 and Australian AS3260 regulations
  • Epoxy encapsulated

TEA-4499 Series Bridging Transformer

TPA4499 is a 1 :1 high impedance transformer for Bridging a telephone line with a high impedance where a low briging loss is required.

Features: 
  • Low profile
  • Conforming to FCC part 68 and CS 03 regulations
  • High inductance
  • Low bridging and insertion losses
  • Low cost

TWA-4477 Series Line Matching Transfomer

TEA4477 is a 1 : 1 line matching transformer with Line matching in 600 or 900 Ω circuits where no loop current handling is required.

Features: 
  • Low cost
  • Small size
  • Conforming to FCC part 68 and CS 03 regulations
  • Balanced center tapped windings

TEA-4466 Series Line Matching Transformer

TEA4466 is a 1 : 1 line matching transformer with Split secondary windings to facilitate phantom power feed.

Features: 
  • Low cost
  • Small size
  • Conforming to FCC part 68 and CS 03 regulations

TEA-4451 Series Line Matching Transformer

 TEA-4451 specification describes a high performance line matching transformer with Line matching in 600 and 900 ohm circuits where low cross talk, accurate impedance matching and high dielectric withstanding voltages are required.

Features: 
  • High dielectric strength
  • Creepage distances and insulation conforming to BS 6301
  • Low insertion loss
  • Low profile
  • Conforms to FCC part 68 and Canadian CS03

CTP-4411 Series Medium Current Inductor

CTP-4411 is a medium current inductor with Core type: 1.57” o.d., Iron Powder, perm 75.
Power rating: 4.50 watts for temp. rise 50 deg C. Typical applications: Input and output filters in Switch Mode Power Supplies.

Features: 
  • Flying leads (1.00”), for vertical or horizontal mounting
  • 4-pin header, for vertical mounting
  • Threaded center hole, flying leads

CTP-4410 Series Medium Current Inductor

CTP-4410 is a medium current inductor with Core type: 1.30” o.d., Iron Powder, perm 75. Power rating: 3.13 watts for temp. rise 50 deg C. Typical applications: Input and output filters in Switch Mode Power Supplies.

Features: 
  • Flying leads (1.00”), for vertical or horizontal mounting
  • 4-pin header, for vertical mounting
  • Threaded center hole, flying leads

CTP-4409 Series Medium Current Inductor

CTP-4409 is a medium current inductor with Core type: 1.06” o.d., Iron Powder, perm 75.Power rating: 2.16 watts for temp. rise 50 deg C.Typical applications: Input and output filters in Switch Mode Power Supplies.

Features: 
  • Flying leads (1.00”), for vertical or horizontal mounting
  • 4-pin header, for vertical mounting
  • Threaded center hole, flying leads
  • 2-pin header, for vertical mounting
Syndicate content