Components and Subsystems

TEW-4962 Series U-BUS Input/Output Transformer

TEW-4962 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW-4962 & -1 meet the electrical requirements for the National TP3410 device.

Features: 
  • Low profile construction.
  • Up to 50 mA line current.
  • TEW4962-1 exceeds the requirements on EN60950 and EN41003.

TEW-4923 Series Input/Output Transformer

TEW-4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface.

Features: 
  • Certified to the safety requirements of: EN41003 and EN60959.
  • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

TEW-4922 Series Input Transformer

TEW-4922 is designed and approved to be used as a receive transformer with MITEL MT89760/-60B and MT89790/-90B devices. Fully encapsulated in epoxy. Also suitable as input/output transformer for other makes of T1/CEPT interface devices.

Features: 
  • Primary rate ISDN network nodes.
  • PBX or computer to T1/CEPT Digital Trunks.
  • High speed data link using T1/CEPT Digital Trunk.
  • Designed to meet reinforced insulation to EN60950 & EN41003

TEW-4921 Series Output Transformer

TEW-4921 is designed and approved to be used as a transmit transformer with the Mitel MT89760/-60B and MT89790/- 90B devices in T1 and CEPT applications. Complies with ANSI T1.408 and CCITT I.431., with regards to Longitudinal Balance. TEW-4921-2 is designed for MT89790B when operating from a single 5 Vdc supply.

Features: 
  • Primary rate ISDN network nodes.
  • PBX or computer to T1/CEPT Digital Trunks.
  • TDM Multiplexers.
  • Fully encapsulated in epoxy.
  • Designed to meet reinforced insulation to EN60950 & EN41003

TEW-4914 Series U-BUS Input/Output Transformer

TEW-4914 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW-4914 & -1 meet the electrical requirements for the MOTOROLA MC145472 device.

Features: 
  • Low profile construction.
  • Up to 50 mA line current.
  • TEW4914-1 is certified to EN60950 and EN41003.

TEW-4855 Series U-BUS Input/Output Transformer

TEW-4855 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW-4855 meets the electrical specifications of ANSI TI.601-1988 and is approved for the Mitel MT8910 DSLIC device.

Features: 
  • High performance 2B1Q line code.
  • Up to 50 mA line current.
  • High insulation between line and equipment side.
  • Exceeds the requirements of: EN60950 and EN41003

TEW-4840 Series U-BUS Input/Output Transformer

TEW-4840 is designed to interface with the subscribers premises (NT) and the 2- wire line side of the Central Office Equipment (LT) in the ISDN Network. TEW-4840 meets the electrical specifications of ANSI TI.601-1988 and is approved for the SIEMENS PEB2091 (V.C1) device.

Features: 
  • Designed to meet EN60950 & EN41003
  • High performance 2B1Q line code.
  • Up to 50 mA line current.
  • High insulation between line and equipment side.

New Product Introductions (NPI)

Choosing the right New Product Introduction (NPI) partner ensures a smooth process from “Concept to Completion.” Innovating companies rely on our award-winning Electronics Manufacturing Services (EMS) team and specialized NPI capabilities to significantly speed time to market and deliver the highest quality products to their customers. Key capabilities include: design engineering, prototyping, supply chain management, PCB/Electromechanical assembly, test engineering services and contract manufacturing expertise.

Allow us to put our team, process and over 35 years of experience to work for you. 

Our Service Differentiators

Features: 

 

The company sets itself apart from competitors by not merely building to a specification, but evaluating assemblies at quote and offering detailed design for manufacturability, assembly and test feedback based on over 35 years of expertise. This process begins with with board layout and carries through prototype and into final production assembly.

One Stop Shopping: Our customers benefit from comprehensive capabilities under a single roof; state-of-the-art contract manufacturing capabilities and engineering expertise with an intimate knowledge of the manufacturing processes. We have built a substantial and loyal customer base with its value proposition of having all the necessary functions under one roof. In fact, the vast majority of first-time customers return with repeat business - often increasing our role in their operational strategy.

Faster Time To Market: We help customers convert ideas or designs into proof of concept assemblies that can rapidly migrate into full-scale production. Our NPI team works directly with engineering teams on their projects and provides timely feedback regarding manufacturability and testability. This valuable information is used to guide the design effort that can lower production costs, improve quality and enhance performance. We have the ability to quick-turn prototypes with its 20+ dedicated NPI specialists; all IPC-610-A Class III certified.  This group serves as a vital link between the customers’ engineering teams and our production department. Rapid prototyping with valuable design feedback means full-scale production can begin sooner and run smoother. While their competition is waiting for their first prototypes, our customers can be on their way to market with finished product that has been optimized for production.

DFx – Design For Excellence: We offer design for manufacturability, assembly and test (DFM / DFA / DFT) expertise that:

 

  • Is offered in the form of an evaluation that is provided to engineering departments (in a consultative manner) for designs when we witness opportunities that can improve the manufacturing process and reduce costs
  • Has been provided proactively to entire customer engineering teams in the form of seminars that include distribution of a DFx guide that can be referenced during new designs
  • Is included in any design created for our customers
  • Has enabled customers to identify opportunities to streamline the build process and realize the lowest possible manufacturing cost
  • Has received national recognition for adding value to our customers

New Product Introduction (NPI) Open House

June 16, 2011
New Product Introduction Center
Street:
71 Perinton Parkway
City:
Fairport
,
Province:
New York
Postal Code:
14450
Country:
United States

Join API and SenDEC for an NPI Open House and Launch Celebration.  Drop in for a toast (or two) and some tasty hor d'oeuvres, as we tour the new facility and explore the company's rapid prototyping and NPI capabilities.  Experience how the process works in real time.  Guests can test drive selected systems and even take home a personal souvenir!

Discover how you can vastly accelerate time to market by leveraging our unique process, which emphasizes Speed, Flexibility and Unparalleled Service, along with the high quality you've come to expect.  Also get introduced to the company's expanded capabilities since January's merger of API Technologies and SenDEC.

Register Here

Medical Design and Manufacturing (MD&M) East

June 7, 2011 (All day) - June 9, 2011 (All day)
Jacob K. Javits Convention Center
City:
New York
,
Province:
New York
Country:
United States

Join the SenDEC team at Booth #381 during Medical Design & Manufacturing East in New York City.  MDM East is the principal resource for more than 3,500 medical OEM companies located in the Northeastern United States. Each year, hundreds of suppliers dedicated to other OEM markets join MD&M East and benefit from targeting the $146 billion medical manufacturing market.

Syndicate content